3362884 - 3340B62 rear connection central pipe - r r

Removing ( Refitting ) Place the car on a ramp. - 5530B56  BATTERY DRIP TRAY COVER - R.R.Disconnect the battery negative terminal.  - 3340A12  A'B.S. system. - electronic and hydraulic CONTROL UNIT R.R. 1. Using the special tool, undo the connector (1a) to the rear brake pipes and release it from the bands (1b) located on the bodyshell.

NameCountry
-Spanner1.856.127.000
Release the pipe from the remaining retaining clips and remove the pipe.
Refitting ( Removing ) Place the rigid pipe from the electrohydraulic control unit to the pipe connector to the rear brakes.Secure the pipe to the retaining clips present on the bodyshell.Using the special tool, tighten the rigid pipe connector to the rear brake pipes.

NameCountry
-Spanner1.856.127.000
 - 3340A12  A'B.S. system. - electronic and hydraulic CONTROL UNIT R.R. Removing ( Refitting ) Remove the protective cap from the bleed valve of one front brake caliperConnect the collection system (pipe and reservoir) to the bleed valve on the brake caliper. Operate the brake pedal until the brake-clutch fluid reservoir is empty. Place the car on a ramp. - 3340A12  A'B.S. system. - electronic and hydraulic CONTROL UNIT R.R. - 7055B81  ANY (ONE) UNDERBODY PROTECTION FOR BRAKING/FUEL SYSTEM - R.R .1. Undo the connector (1a) at the rear brake pipes and release it from the bands (1b) on the bodyshell. Release the pipe from the remaining retaining clips and remove the pipe.
Refitting ( Removing ) Fit the pipe and secure it to the retaining clips.Tighten the connector to the rear brake pipes and secure it to the bands on the bodyshell. - 7055B81  ANY (ONE) UNDERBODY PROTECTION FOR BRAKING/FUEL SYSTEM - R.R . - 3340A12  A'B.S. system. - electronic and hydraulic CONTROL UNIT R.R. - 0010T64  brake and or clutch fluid check level and top up as necessary - 0010T65  hydraulic brake system bleed airRemove the vehicle from the lift.