1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE - Fiat - STILO - eLearn

3362392 - 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE

) 1016A40 COPERCHIO BOBINE accensione su testa cilindri - S.R.1. Undo the retaining bolts.2. Disconnect the coolant recirculation pipe.3. Replace the power assisted steering fluid reservoir to one side.

1. Position the hooks fitted with metal cables secured to the crankcase and to the alternator/compressor mounting for supporting the engine.2. Secure the two metal cables to the hydraulic lifting device.

1. Undo the nuts fixing the flexible mounting to the rigid engine support.2. Undo the bolts fixing the mounting to the bodyshell.3. Remove the power unit flexible mounting.

Refitting ( Removing

) Fit the engine flexible mounting complete with rigid support.Tighten the bolts securing the flexible mounting to the body to torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	RIGID ENGINE MOUNT, TIMING SIDE	M10 X 1.25	(Bodyshell side) 5

Tighten the nuts fixing the rigid support to the engine support.

	Fastening	Component	Ø	Value(daNm)
-	Nut	RIGID ENGINE MOUNT, TIMING SIDE	M12 X 1.25	(Engine side) 7.5

Remove the hooks and the chains positioned previously for supporting the power unit.Fit the power steering fluid reservoirConnect the coolant recirculation pipe to the engine.Tighten the engine coolant reservoir fixing bolts. 1016A40 COPERCHIO BOBINE accensione su testa cilindri - S.R.