3362409 - 1020D18 front crank shaft cover oil seal - replace

Removing ( Refitting ) Place the car on a lift. - 4450B04  right front wheel r r - 7055B54  under-engine guard - r r - 7055B42  Additional FRONT WHEEL ARCH (one), left or right - R.R. - 1092D10  air conditioner compressor drive belt - r + r - 1092B68  belt from a/c compressor to alternator drive r + r - 5530B56  BATTERY DRIP TRAY COVER - R.R.Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal. - 1016A40  ignition coil cover on cylinder head- r+r - 1032B10  toothed timing belt - r + r for timing adjustment or replacement - 1032B44  toothed drive pulley - r + r with timing belt removed . Remove the oil seal from the crankshaft front cover.
Take care not to damage the housing in the front cover.
Refitting ( Removing ) 1. Fit a new oil seal (1a) on the crankshaft front cover using the tool (1b).

NameCountry
1bFitting tool1.860.816.000
 - 1032B44  toothed drive pulley - r + r with timing belt removed - 1032B10  toothed timing belt - r + r for timing adjustment or replacement - 1016A40  ignition coil cover on cylinder head- r+rConnect the battery negative terminal lead. - 5530B56  BATTERY DRIP TRAY COVER - R.R. - 1092B68  belt from a/c compressor to alternator drive r + r - 1092D10  air conditioner compressor drive belt - r + r - 7055B42  Additional FRONT WHEEL ARCH (one), left or right - R.R. - 7055B54  under-engine guard - r r - 4450B04  right front wheel r r - 0010T20  coolant change - 7055B54  under-engine guard - r rRemove the vehicle from the ramp.