3362458 - 1040B32 FRONT FUEL DELIVERY LINE - R.R.

Removing ( Refitting )     1016A40 ignition coil cover on cylinder head- r+r-Release fuel pressure through device attached to the valve at the end of the single fuel manifold pipe.

NameCountry
-Rapid connector1.870.684.000
1. Disconnect the rapid attachment for the fuel supply pipe from the manifold.Release the delivery pipe from the clips securing it to the bulkhead.
Raise the car.1. Undo the fixing bolts (1a) and remove the tank right side guard (1b).
1. Disconnect the rapid connector for the front supply pipe from the rear section.
1. Undo the fixing bolts (1a) and remove the fuel pipe guard (1b).
1. Release fuel pipe (1a) from retaining clips (1b) on the underbody.
1. Remove the fuel pipe from the upper part of the engine bay.
Refitting ( Removing ) Working from beneath the car, fit the pipe, partly lift the axle and position the delivery pipe.Attach the pipe to the retaining clips on the underbodyConnect the fuel pipe to the quick-release fitting with the rear section.Fit lower pipe guard and tighten the retaining bolts.Fit the tank right guard and tighten the fixing bolts.Lower the vehicle.Connect the rapid connector for the fuel supply pipe to the manifold.Secure both pipes to the partition.    1016A40 ignition coil cover on cylinder head- r+r