3362616 - 1072D54 actuator for vis device with adjustable air ducts - r r

Removing ( Refitting ) Open the boot, remove the cover located on the left and disconnect the battery's negative cable. - 1016A40  ignition coil cover on cylinder head- r+r . 1. Disconnect the electrical connection for the timing sensor.

	Name	Connector
1	Timing sensor	K47

2. Disconnect the fuel vapour recovery pipe.3. Disconnect the electrical connection from the actuator of the device with swinging air ducts.

	Name	Connector
3	Variable geometry control solenoid	L15

4. Disconnect the spherical attachment of the lever on the actuator of the device with swinging air ducts.5. Undo the bolts (5a) and remove the swinging air duct control actuator (5b), after disconnecting the pipe (5c). Refitting ( Removing ) Connect the pipe to the actuator of the device with swinging air ducts, then place it back in its seating and secure with its bolts. Connect the spherical attachment of the lever on the actuator of the device with swinging air ducts.Connect the electrical connection of the actuator of the device with swinging air ducts.

	Name	Connector
-	Variable geometry control solenoid	L15

Connect the fuel vapour recovery pipe.Connect the timing sensor electrical connection.

	Name	Connector
-	Timing sensor	K47

 - 1016A40  ignition coil cover on cylinder head- r+r . Connect the battery's negative lead, then close the boot.