2127C56 CLUTCH SOLENOID VALVE - R.R. - Fiat - STILO - eLearn

3362788 - 2127C56 CLUTCH SOLENOID VALVE - R.R.

) - 5530B56 BATTERY DRIP TRAY COVER - R.R. - 1016A40 ignition coil cover on cylinder head- r+r- 5530B10 battery - r+r - 5530B52 Battery DRIP TRAY/SUPPORT - R.R.Temporarily refit the battery and reconnect the negative and positive terminals.Turn the ignition ON.Carry out the Selespeed hydraulic circuit depressurisation procedure using an Examiner tester. 1. Disconnect the electrical connection on the hydraulic selection system pump.

	Name	Connector
1	"Selespeed gearbox electric pump"	N47

- 1056B82 injection/ignition system e.c.u. (one) - r + r - 1048A31 RIGID PIPE between air filter and intake manifold - R.R.1. Disconnect the electrical connection on the clutch control solenoid.

	Name	Connector
1	Clutch control solenoid	L56

2. Undo the bolts to the hydraulic unit.3. Remove the clutch control solenoid.

Refitting ( Removing

) Fit the clutch control solenoid on the hydraulic unit and tighten the fixing bolts.Connect the electrical connection on the clutch control solenoid.

	Name	Connector
-	Clutch control solenoid	L56

Connect the electrical connection on the hydraulic selection system pump.

	Name	Connector
-	"Selespeed gearbox electric pump"	N47

- 1048A31 RIGID PIPE between air filter and intake manifold - R.R. - 1056B82 injection/ignition system e.c.u. (one) - r + r - 5530B52 Battery DRIP TRAY/SUPPORT - R.R.- 5530B10 battery - r+r Connect the battery negative terminal. - 0010T47 hydraulic system fluid for gearbox with hydraulic selection check level and top up if necessary- 0010T46 hydraulic system fluid for gearbox with hydraulic selection change - 1016A40 ignition coil cover on cylinder head- r+r - 5530B56 BATTERY DRIP TRAY COVER - R.R.