2127E40 HYDRAULIC SELECTION GEARBOX SPEED SELECTION POSITION SENSOR - R R - Fiat - STILO - eLearn - 4CarData

3362792 - 2127E40 hydraulic selection gearbox speed selection position sensor - r r

Removing ( Refitting

) - 5530B56 BATTERY DRIP TRAY COVER - R.R. - 1016A40 ignition coil cover on cylinder head- r+r- 5530B10 battery - r+r - 5530B52 Battery DRIP TRAY/SUPPORT - R.R.Temporarily refit the battery and reconnect the negative and positive terminals.

Make sure that the gearbox is neutral.

Turn the ignition ON.Carry out the Selespeed hydraulic circuit depressurisation procedure using an Examiner tester. 1. Disconnect the electrical connection on the hydraulic selection system pump.

	Name	Connector
1	"Selespeed gearbox electric pump"	N47

- 1056B82 injection/ignition system e.c.u. (one) - r + r - 1048A31 RIGID PIPE between air filter and intake manifold - R.R. - 2127C42 HYDRAULIC CLUTCH UNIT AND ELECTRO-HYDRAULIC GEAR ENGAGEMENT SELECTOR DEVICE - R.R. - 4450B02 left front wheel r r - 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R. - 2127C49 ELECTRO-HYDRAULIC SELECTION GEAR ENGAGEMENT - R.R. WITH HYDRAULIC ACTUATOR REMOVED1. Undo the bolts securing the sensor to the selection unit.2. Remove the gear selection position sensor.

Refitting ( Removing

) Fit the gear selection position sensor.Tighten the bolts fixing the sensor to the selection unit. - 2127C49 ELECTRO-HYDRAULIC SELECTION GEAR ENGAGEMENT - R.R. WITH HYDRAULIC ACTUATOR REMOVED - 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R. - 4450B02 left front wheel r r - 2127C42 HYDRAULIC CLUTCH UNIT AND ELECTRO-HYDRAULIC GEAR ENGAGEMENT SELECTOR DEVICE - R.R. - 1048A31 RIGID PIPE between air filter and intake manifold - R.R. - 1056B82 injection/ignition system e.c.u. (one) - r + rConnect the electrical connection on the hydraulic selection system pump.

	Name	Connector
-	"Selespeed gearbox electric pump"	N47

- 5530B52 Battery DRIP TRAY/SUPPORT - R.R.- 5530B10 battery - r+r Connect the battery negative terminal.- 0010T46 hydraulic system fluid for gearbox with hydraulic selection change - 0010T47 hydraulic system fluid for gearbox with hydraulic selection check level and top up if necessary - 1016A40 ignition coil cover on cylinder head- r+r - 5530B56 BATTERY DRIP TRAY COVER - R.R.