3362794 - 2127E50 hydraulic selection gearbox circuit pressure sensor - r r

Removing ( Refitting )  - 5530B56  BATTERY DRIP TRAY COVER - R.R.- 5530B10 battery - r+r  - 5530B52  Battery DRIP TRAY/SUPPORT - R.R.Temporarily refit the battery and reconnect the negative and positive terminals.Turn the ignition ON.Carry out the Selespeed hydraulic circuit depressurisation procedure using an Examiner tester. 1. Disconnect the electrical connection on the hydraulic selection system pump.

	Name	Connector
1	"Selespeed gearbox electric pump"	N47

1. Disconnect the electrical connection for the pressure sensor.

	Name	Connector
1	Pressure sensor on transmission	K96

2. Undo and remove the pressure sensor from the hydraulic unit. Refitting ( Removing ) Fit the pressure sensor from the hydraulic unit.Connect the electrical connection of the pressure sensor.

	Name	Connector
-	Pressure sensor on transmission	K96

Connect the electrical connection on the hydraulic selection system pump.

	Name	Connector
-	"Selespeed gearbox electric pump"	N47

 - 5530B52  Battery DRIP TRAY/SUPPORT - R.R.- 5530B10 battery - r+r Connect the battery negative terminal. - 0010T47  hydraulic system fluid for gearbox with hydraulic selection check level and top up if necessary- 0010T46 hydraulic system fluid for gearbox with hydraulic selection change  - 5530B56  BATTERY DRIP TRAY COVER - R.R.