2127E94 WIRING FOR MANUAL GEARBOX HYDRAULIC SELECTION SYSTEM ON HYDRAULIC SELECTION UNIT R R OR CHANGE - Fiat - STILO - eLearn

3362796 - 2127E94 wiring for manual gearbox hydraulic selection system on hydraulic selection unit r r or change

) - 5530B56 BATTERY DRIP TRAY COVER - R.R.- 5530B10 battery - r+r - 5530B52 Battery DRIP TRAY/SUPPORT - R.R. - 1056B82 injection/ignition system e.c.u. (one) - r + r - 1048A31 RIGID PIPE between air filter and intake manifold - R.R.1. Disconnect the electrical connection for the even gears engagement solenoid (1a), uneven gears engagement solenoid (1b), selection solenoid (1c) and clutch actuator solenoid (1d).

	Name	Connector
1a	Solenoid 1 (gear engagement)	L51

	Name	Connector
1b	Solenoid 1 (gear engagement)	L51

	Name	Connector
1c	Solenoid 3 (gear engagement)	L53

	Name	Connector
1d	Clutch control solenoid	L56

2. Disconnect the electrical connector for the oil pressure sensor.

	Name	Connector
2	Pressure sensor on transmission	K96

3. Disconnect the electrical connector for the clutch position sensor.

	Name	Connector
3	Sensor on clutch	K99

4. Disconnect the electrical connection of the speed sensor.

	Name	Connector
4	Transmission output speed sensor	K78

5. Disconnect the electrical connections (5a) and (5b) of the electrohydraulic selection and engagement device.

	Name	Connector
5a	Speed selection potentiometer	K68

	Name	Connector
5b	Gear shift potentiometer	K69

6. Disconnect the join (6a) and remove the electrohydraulic selection system wiring (6b) from the engine compartment.

	Name	Connector
6a	"Selespeed gearbox sensors coupling"	D79

Refitting ( Removing

) Fit the electrohydraulic selection system wiring in the engine compartment.Connect the connection for the gearbox sensors.

	Name	Connector
-	"Selespeed gearbox sensors coupling"	D79

Connect the electrical connections of the electrohydraulic selection and engagement device.

	Name	Connector
-	Speed selection potentiometer	K68

	Name	Connector
-	Gear shift potentiometer	K69

Connect the speed sensor electrical connection.

	Name	Connector
-	Transmission output speed sensor	K78

Connect the electrical connection for the clutch position sensor.

	Name	Connector
-	Sensor on clutch	K99

Connect the electrical connection for the oil pressure sensor.

	Name	Connector
-	Pressure sensor on transmission	K96

Connect the electrical connection for the even gears engagement solenoid, uneven gears engagement solenoid, selection solenoid and clutch actuator solenoid.

	Name	Connector
-	Solenoid 1 (gear engagement)	L51

	Name	Connector
-	Solenoid 1 (gear engagement)	L51

	Name	Connector
-	Solenoid 3 (gear engagement)	L53

	Name	Connector
-	Clutch control solenoid	L56

- 1048A31 RIGID PIPE between air filter and intake manifold - R.R. - 1056B82 injection/ignition system e.c.u. (one) - r + r - 5530B52 Battery DRIP TRAY/SUPPORT - R.R.- 5530B10 battery - r+r - 5530B56 BATTERY DRIP TRAY COVER - R.R.