3363558 - 1020A24 CRANKCASE OIL SUMP - R.R CLEAN SURFACES FOR SEALANT APPLICATION WITH ENGINE OR INTERFERING COMPONENTS REMOVED

Removing ( Refitting )     Op. 1004D40 ENGINE - POSITION ON STAND AND REMOVE.1. Undo the front and rear bolts (1b) fixing the crankcase sump using the spanner (1b).
DescriptionCode
1bSpanner1.860.834.000
2. Undo the side bolts (2a) fixing the crankcase sump using the spanner (2b).
DescriptionCode
2bSpanner1.860.833.000
3. Cut the oil sump sealant using the tool.
DescriptionCode
3Blade1.870.718.000
4. Remove the crankcase sump.5. Remove the sump plug.
Refitting ( Removing ) Clean the matching surfaces between the crankcase sump and the cylinder block/crankcase.Apply silicon sealant to the entire perimeter of the crankcase sump.1. Place the crankcase sump in its housing.2. Tighten the side bolts (2a) fixing the crankcase sump to the recommended torque using the spanner (2b).
FasteningComponentØ  Value(daNm)
2aSide boltENGINE OIL SUMPM6(Engine crankcase side) 0.9 -1.2
DescriptionCode
2bSpanner1.860.833.000
3. Tighten the front and rear bolts (3a) fixing the crankcase sump to the recommended torque using the spanner (3b).
FasteningComponentØ  Value(daNm)
3aFront and rear boltENGINE OIL SUMPM8(Engine crankcase side) 2.3 - 3.3
DescriptionCode
3bSpanner1.860.834.000
4. Place the plug in the housing and fasten it to the recommended torque.
FasteningComponentØ  Value(daNm)
-BoltENGINE OIL DRAIN PLUGM81,8 - 2,7
    Op. 1004D40 ENGINE - POSITION ON STAND AND REMOVE.