3363567 - 1088C32 thermostat unit - r + r with cylinder head removed

Removing ( Refitting ) 1. Disconnect the electrical connection from the engine coolant temperature sensor.

	Name	Connector
1	Engine temperature sender unit	K36

2. Disconnect the coolant return pipe to the engine coolant reservoir, thermostat side.3. Undo the bolts (3a) and remove the thermostat (3b).Remove the gasket. Refitting ( Removing ) Place the thermostat, complete with gasket, back in its housing and fix it tightening the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	THERMOSTAT	M8	(Cylinder head side) 2.3 ÷ 3.3

Connect the coolant return pipe to the engine coolant reservoir, thermostat side.Connect the electrical connection to the engine coolant temperature sensor.

	Fastening	Component	Ø	Value(daNm)
-	-	ENGINE COOLANT TEMPERATURE SENSOR.	-	2,7 - 4,0