3362883 - 3340B56 RIGID PIPE from hydraulic CONTROL UNIT to RIGHT FRONT BRAKE - R.R.

Removing ( Refitting ) Place the car on a lift.  - 4450B12  front or rear wheels (two) - r+r - 7055B54  under-engine guard - r r- 7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R.  - 1048A10  air cleaner filtering element - replace - 1072C16  exhaust manifold with catalytic converter - r r Refitting ( Removing ) Fit the rigid pipe from the electrohydraulic control unit to the front right brake.Raise the jack until the crossmember is fully home against the bodyshell.Tighten to torque the bolts securing the crossmember to the body longitudinal member.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	ENGINE OR ROD ANCHORAGE BEAM	M14 x 1.5	15

Tighten to torque the bolts securing the crossmember brackets to the body longitudinal member.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	ENGINE OR ROD ANCHORAGE BEAM	M12 x 1.25	11.

Tighten to torque the bolts securing the steering box to the crossmember.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	ENGINE OR ROD ANCHORAGE BEAM	M12 x 1.25	8,5

 - 1072C16  exhaust manifold with catalytic converter - r r - 1048A10  air cleaner filtering element - replace Using the special tool, tighten the nut securing the rigid pipe on the flexible connector to the front brake calipers.

	Name	Country
-	Box wrench for brake fittings	1.856.132.000

Using the special tool, tighten the rigid pipe from ABS control unit to the right front brake on the hydraulic and electronic control unit.

	Name	Country
-	Spanner	1.856.127.000

	Fastening	Component	Ø	Value(daNm)
-	Male connector	ABS CONTROL UNIT RIGID FRONT BRAKE PIPES../	M12 x 1	1.4

Secure the rigid pipe from ABS control unit to right front brake to the retaining clips present along the pipe. - 3340B52  pump/central obs pipe - r rConnect the battery negative terminal. - 5530B56  BATTERY DRIP TRAY COVER - R.R.