Extract the hazard warning lights
control from the dashboard With the button released, check that the
circuit between pins 2 and 3 of the hazard warning lights control
is OPENWith the button pressed, check that the
circuit between pins 2 and 3 of the hazard warning lights control
is CLOSEDLuminous diode internal operating circuit
testConnect pin 1 to the positive battery terminal
with a voltage of 12V Connect pin 2 to the negative battery terminalCheck that the diode lights up dimly.Connect pin 4 to the positive battery terminal
with a voltage of 12V.Connect pin 2 to the negative battery terminalCheck that the diode lights up more brightly.
