3360167 - A10 ALARM CENTRAL LOCKING NOT WORKING
When the system is activated using the remote control unit, the system activates correctly (visual/acoustic signals and deterrent led working), but the door lock system does not work. | When the body computer node receives an alarm activation/deactivation signal, it sends a door open/closure signal to the driver's door node (which controls the driver's front door catch) and the passenger door node (which controls the passenger front door catch) via the B-CAN Node. The body computer node controls boot opening/closure directly (according to the boot control settings). |
| Results of the tests | ||||
| 0 | PRELIMINARY CHECKS | All OK | Problems met | Operation |
|---|---|---|---|---|
| Use the mechanical key to check the door lock system is working properly. | Continue to Step 1 | Door lock system not working. | Continue with door lock system diagnosis See table P11 CENTRAL LOCKING | |
| Operation of inertia switch | Release the inertia switch | |||
| 1 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
Connect the Examine to the body computer node and check:
| Continue to Step 2 | Presence of faults. | Continue according to the instructions for the diagnostic equipment | |
| 2 | CHECKING CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | Fault persists | Replace the body computer node Op. 5505A32Search for the fault starting from another symptom' | |