I15 (SIDE) BRAKE LIGHTS NOT WORKING - Fiat - STILO - eLearn

3360235 - I15 (SIDE) BRAKE LIGHTS NOT WORKING

Brake lights do not work The third brake light works normally

The RH and LH brake lights are controlled directly from the Body Computer Node on the basis of information from the Brake Light switch.

1	CHECK WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
		Results of the tests
	Connect and Examiner to the tester input and check the Body Computer Node for: faults in the Brake Lights Brake Light operation by means of active diagnosis plausibility of Brake Light On/Off parameter	Continue to Step 6	Presence of error in Brake Light bulbs	Continue as suggested by the tester
			Lights do not come on during active diagnosis	Continue to Step 3
			The Brake Light on/off parameter does not change	Continue to Step 2
2	CHECKING FACIA CONTROL UNIT	All OK	Problems met	Operation
	Remove the facia control unit, separate it from the Body Computer Node and check internal continuity of the Brake Light switch positive control input to the Body Computer Node	Continue to Step 6	Facia control unit interior switch	Change the facia control unit Op. 5505A10
3	CHECKING ELECTRICAL EQUIPMENT	All OK	Problems met	Operation
	Check continuity/insulation between Body Computer Node and tail-lights See E2021 BRAKE LIGHTS	Continue to Step 4	Wiring faulty	Renew the electrical connections See E2021 BRAKE LIGHTS
4	CHECKING BRAKE LIGHTS	All OK	Problems met	Operation
	Check light efficiency	Continue to Step 5	Brake light faults	Change brake lights
5	CHECK TAIL-LIGHTS	All OK	Problems met	Operation
	Check condition of the tail-lights	Continue to Step 6	Fault in tail-lights	Restore operation and change lights if necessary
6	CHECK CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present		Fault persists	Replace the Body Computer Op. 5505A32Search for the fault starting from another symptom'