3360281 - K67 VDC WARNING LIGHT ON CONTROL PANEL ON
 | The Brake Node sends a FAULT/INTERVENTION message via the C-CAN network to the Body Computer. This makes the message available through the Gateway via the B-CAN network to the Instrument Panel Node, which turns on the warning light and displays a FAULT/INTERVENTION message on the active matrix. |
| Results of the tests | ||||
| 0 | PRELIMINARY CHECK | All OK | Problems met | Operation |
|---|---|---|---|---|
| Check for a VDC fault message | Continue to Step 3 | Message present | Continue to Step 1 | |
| 1 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
Connect the tester, check the BRAKE NODE for:
| Continue to Step 2 | System/component fault | Continue following the instructions given by the diagnostic equipment | |
| Warning light fault/warning light damaged | Continue to Step 3 | |||
| 2 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
Keep the tester connected and check the BRAKE NODE for:
| Continue to Step 4 | Warning light does not flash | Continue to Step 3 | |
| 3 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
Connect the tester or keep connected and check the INSTRUMENT PANEL NODE for:
| Continue to Step 4 | warning light does not flash | Replace instrument panel Op. 5560B11 | |
| 4 | CHECKING CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | Fault persists | Change the ABS control unitSearch for the fault starting from another symptom' | ||