3360311 - M10 (ELECTRICALLY OPERATED) REAR WINDOWS NOT WORKING

The windows do not move at all when switches in the rear doors are activated.

The boot compartment node receives a window raise/lower command directly from individual switches on the rear doors. It receives a window raise/lower command from a switch panel on the front driver's door via the B-CAN line. Two specific fuses housed in the underfacia junction unit protect the electric rear window power supply.

		Results of the tests
0	PRELIMINARY CHECK	All OK	Problems met	Operation
	Check the rear windows are operating correctly by means of the switches on the driver side front door control panel.	Continue to Step 3	Rear windows do not move.	Continue to Step 1
1	CHECKING FUSES	All OK	Problems met	Operation
	Check the condition of the fuses protecting the rear window power supply system. See   E3051  ELECTRIC REAR WINDOWS	Continue to Step 2	Both fuses are blown	Change the blown fuses and investigate the causes of damage.
2	CHECKING WITH TESTER	All OK	Problems met	Operation
	Connect an Examiner and check for errors in the boot compartment node	Continue to Step 4	There are errors	Continue according to the instructions for the diagnostic equipment
3	CHECKING ELECTRICAL CIRCUIT	All OK	Problems met	Operation
	Check continuity/insulation of the electrical connection between the facia control unit and the boot compartment node. See   E3051  ELECTRIC REAR WINDOWS	Continue to Step 8	Electrical connection broken or not insulated.	Restore electrical connection continuity/insulation See   E3051  ELECTRIC REAR WINDOWS
4	CHECKING ELECTRICAL CIRCUIT	All OK	Problems met	Operation
	Check continuity/insulation of the electrical connection between individual rear window raise/lower control switches and the boot compartment node	Continue to Step 5	Electrical connection broken or not insulated.	Restore electrical connection continuity/insulation See   E3051  ELECTRIC REAR WINDOWS
5	CHECKING ELECTRICAL CIRCUIT	All OK	Problems met	Operation
	Connect an Examiner and check for errors in the rear window inhibition switch.	Continue to Step 6	Switch not working	Change the control panel on the driver's side front door Op. 7005M11
6	CHECKING WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Use active diagnosis to check rear window inhibition led operation.	Continue to Step 7	Led not working	Change the control panel on the front driver's door Op. 7005M11
7	CHECKING CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	The fault persists	Change the driver's door node
8	CHECKING CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present		The fault persists	Change the boot compartment nodeSearch for the fault starting from another symptom'