3360331 - P11 CENTRAL LOCKING / NOT WORKING WITH REMOTE CONTROL
When the door open/close command is given from the remote control, the door lock system does not work. | The Body Computer Node receives a signal from the remote control via the radio aerial. Once the signal is received, it sends a door open/close signal to the door nodes and boot node (if present) and controls the boot lock directly if the boot node is missing. |
| Results of the tests | ||||
| 0 | PRELIMINARY CHECK | All OK | Problems met | Operation |
|---|---|---|---|---|
| Control door closure/opening using the second remote control unit supplied with the car. | Continue to Step 4 | Problem persists | Continue to Step 1 | |
| 1 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
| Connect the Examiner to the body computer Node and check for errors. | Continue to Step 2 | Error found: radio receiver faulty. | Continue to Step 3 | |
| 2 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
Keep the tester connected and check the following in parameter mode:
| Continue to Step 5 | Remote control unit buttons malfunction | Programme the remote control unit. | |
| Remote control unit buttons malfunction | Continue to Step 4 | |||
| 3 | CHECKING ELECTRICAL CIRCUIT | All OK | Problems met | Operation |
| Check the radio aerial is not broken or poorly connected to the body computer node. | Continue to Step 5 | Aerial lead broken | Restore aerial lead continuity/insulation : See E3040 CENTRAL LOCKING | |
| Aerial lead connector incorrectly connected to the Body Computer Node. | Connect the aerial lead connector correctly to the Body Computer Node. | |||
| 4 | CHECKING REMOTE CONTROL UNIT BATTERY STATUS | All OK | Problems met | Operation |
| Check the remote control unit battery is flat | Continue to Step 6 | Battery flat | Change the remote control battery | |
| 5 | CHECKING CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | The fault persists | Change body computer node Op. 5505A32 | |
| 6 | CHECKING CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | The fault persists | Change the remote control unit and store the new remote control unit in the Body Computer Node.Search for the fault starting from another symptom' | ||