1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE - Fiat - STILO - eLearn

3362392 - 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE

) 1. Use a bracket (1a) and secure it at the point shown to the power unit using an ordinary bolt (1b).2. Use the tool (2a) and secure the hook (2b) to the bracket.

	Description	Code
2a	Crossmember	1.870.595.000

1. Undo the retaining bolts.2. Remove the engine coolant reservoir from the housing placing it outside of the work area.

1. Undo the fixing nuts (1a) and the bolts (1b) and remove the front support flexible mounting (1c).

Refitting ( Removing

) Fit the front support flexible mounting and tighten the fixing nuts and bolts.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	FRONT FLEXIBLE MOUNTING BLOCKS, POWER UNIT	M10	(Bodyshell) 4.3

	Fastening	Component	Ø	Value(daNm)
-	Nut	FRONT FLEXIBLE MOUNTING BLOCKS, POWER UNIT	M10	(Engine) 5

Fit the engine coolant reservoir and tighten the fixing bolts.Remove the tool or the bracket used for supporting the power unit.

	Description	Code
-	Crossmember	1.870.595.000