3362421 - 1028H21 PISTON WITH CONNECTING ROD - R.R. FOR VERSION WITH AIR CONDITIONING

Removing ( Refitting ) Position the vehicle on a lift.    Op. 1048A10 AIR FILTER ASSEMBLY - R.R.    Op. 1072C44 EXHAUST MANIFOLD HEAT SHIELD - R+R    Op. 1072C16 EXHAUST MANIFOLD WITH CATALYTIC CONVERTER - R.R.    Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE    Op. 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R.    7055B42 PASSARUOTA supplementare ANTERIORE (uno), sx o dx - S.R.    Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R    Op. 1092B60 ALTERNATOR DRIVE BELT - R + R    Op. 1092A12 CRANKSHAFT PULLEY - R+R FOR VERSIONS WITH AIR CONDITIONING    Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT    Op. 1016B10 SINGLE CAMSHAFT HOUSING - REPLACE GASKET    Op. 1016C11 SINGLE CYLINDER HEAD - R.R. AND REPLACE GASKET ON VERSIONS WITH AIR CONDITIONING    Op. 1020A30 ENGINE OIL DRAIN PLUG - REPLACE    Op. 1020A20 CRANKCASE OIL SUMP - R.R CLEAN SURFACES FOR SEALANT APPLICATION    Op. 1084B28 ENGINE OIL INTAKE PUMP - R + R WITH CRANKCASE SUMP REMOVED1. Undo the bolts fixing the connecting rod cap. Lower the lift.Remove the piston complete with connecting rod. Refitting ( Removing ) 1. Use the tool (1a) and fit the piston (1b) in the cylinder liner/bore.

	Description	Code
1a	Fitting tool	1.860.700.000

Make sure that the arrow stamped on the piston crown is in the direction of the timing side and that the sequential number stamped on the big end corresponds to the one on the connecting rod cap

Position the connecting rod caps and secure them by tightening the fixing bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	CONNECTING ROD CAPS	M8	4.1

    Op. 1084B28 ENGINE OIL INTAKE PUMP - R + R WITH CRANKCASE SUMP REMOVED    Op. 1020A20 CRANKCASE OIL SUMP - R.R CLEAN SURFACES FOR SEALANT APPLICATION    Op. 1020A30 ENGINE OIL DRAIN PLUG - REPLACE    Op. 1016C11 SINGLE CYLINDER HEAD - R.R. AND REPLACE GASKET ON VERSIONS WITH AIR CONDITIONING    Op. 1016B10 SINGLE CAMSHAFT HOUSING - REPLACE GASKET    Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT    Op. 1092A12 CRANKSHAFT PULLEY - R+R FOR VERSIONS WITH AIR CONDITIONING    Op. 1092B60 ALTERNATOR DRIVE BELT - R + R    Op. 1092B64 ALTERNATOR DRIVE BELT - ADJUST TENSION    Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R    7055B42 PASSARUOTA supplementare ANTERIORE (uno), sx o dx - S.R.    Op. 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R.    Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE    Op. 1072C16 EXHAUST MANIFOLD WITH CATALYTIC CONVERTER - R.R.    Op. 1072C44 EXHAUST MANIFOLD HEAT SHIELD - R+R    Op. 1048A10 AIR FILTER ASSEMBLY - R.R.    Op. 0010T10 CHANGE ENGINE OIL    Op. 0010T20 ENGINE COOLANT - CHANGERemove the vehicle from the lift.