1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R - Fiat - STILO - eLearn

3362438 - 1032D12 timing system protective cover(s) - r + r

) Place the car on a ramp. - 5530B56 BATTERY DRIP TRAY COVER - R.R.Disconnect the battery negative terminal.1. Disconnect the engine rpm sensor.

	Name	Connector
1	RPM sensor	K46

Release the electrical wiring for the rpm sensor from the retaining bands.1. Undo the fixing bolt (1a), remove the engine rpm sensor coupling (1b) from the housing, then remove the timing belt upper protective cover (1c), releasing the sensor electrical wiring.

Raise the ramp. - 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R. RIGHT SIDE PROTECTION - 1092B60 alternator drive belt - r + r - 1092A10 Crankshaft services PULLEY - R.R.1. Undo the fixing bolts (1a) and remove the lower protective timing cover (1b).

Refitting ( Removing

) Fit the lower protection and tighten the fixing bolts. - 1092A10 Crankshaft services PULLEY - R.R. - 1092B60 alternator drive belt - r + r - 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R. RIGHT SIDE PROTECTION Lower the lift.Fit the coupling for the rpm sensor in the housing in the upper cover.Fit the upper protective cover and secure it using the bolts.Secure the electrical wiring for the rpm sensor to the retaining bands.Connect the rpm sensor.

	Name	Connector
-	RPM sensor	K46

Connect the battery negative terminal. - 5530B56 BATTERY DRIP TRAY COVER - R.R.Remove the vehicle from the ramp.