3362741 - 1820B48 FLEXIBLE supply PIPE to operating cylinder -R.R.

Removing ( Refitting ) Position the vehicle on the ramp - 5530B56  BATTERY DRIP TRAY COVER - R.R.- 5530B10 battery - r+r  - 5530B52  Battery DRIP TRAY/SUPPORT - R.R.Remove the protective cap from the bleed valve of one front brake caliperConnect the collection system (pipe and reservoir) to the bleed valve on the brake caliper. Operate the brake pedal until the brake-clutch fluid reservoir is empty. 1. Undo the nut (1a) and disconnect the rigid pipe (1b) from the slave cylinder from the damper. 1. Release the pipe from the retaining band. 1. Raise the clip (1a) and disconnect the pipe (1b) from the clutch release cylinder (1c).Remove the pipe from the engine compartment. Refitting ( Removing ) Fit the pipe in the engine bay and connect it to the clutch release cylinder.Connect the rigid pipe to the master cylinder (pump) and tighten the connector to the damper.Secure the rigid pipe to the band in the wheel compartment. - 0010T67  hydraulic clutch system bleed air - 5530B52  Battery DRIP TRAY/SUPPORT - R.R.- 5530B10 battery - r+r  - 5530B56  BATTERY DRIP TRAY COVER - R.R.