Carry out the operations describe
below to remove the inner cover. - 5530B56 BATTERY DRIP TRAY COVER - R.R.Disconnect the battery negative terminal. - 7045A10 l/h or r/h front seat (one) - r+rFold the front seat over so that the bolts
fixing the side cover are accessible.1. Undo the front (1a) and side (1b) fixing bolts.2. Release the inner side cover and remove it from the housing.
Fold the front seat over so
that the bolts fixing the glove compartment support are accessible.1. Undo the front (1a) and rear (1b) fixing bolts.2. Release the electrical wiring (2a) from the retaining springs
(2b) on the glove compartment support.
1. Release the glove compartment support and remove it from the
housing.
Carry out the operations described
below for front seats equipped with passenger presence sensors.1. Release the electrical connector for the passenger sensor from
the contact holder support.
Release the electrical wiring
for the passenger sensor from the retaining bands on the cushion
frame.1. Keep the passenger sensor electrical wiring and remove the cushion
upholstery from the housing.
1. Separate the passenger sensor from the cushion upholstery.