3362728 - 1820A26 thrust bearing linkage - r + r with gearbox removed

Removing ( Refitting ) 1. Remove the circlip (1a) retaining the clutch release lever (1b) and remove the lever.2. Remove the top bush.3. Withdraw the fork control shaft.4. Remove the bottom bush. Refitting ( Removing ) Check the condition of the removed components.Replace the bushes, if there is too much play on the fork shaft.Refit the bottom bush.Refit the fork control shaft.Refit the top bush.Position the clutch release lever and secure it to the fork shaft using the specific circlip.