5010A16 HEATER/ENGINE LINE - R R - Fiat - STILO - eLearn

3362972 - 5010A16 heater/engine line - r r

) Position the vehicle on the rampDisconnect the lower coolant outlet hose from the radiator and drain the engine coolant.

Recover the coolant using a suitable container.

1. Disconnect the water return pipe from the heater, heater side.

Release the water return pipe from the heater from the fastenings connecting it to the supply pipe to the heater.1. Disconnect the water return pipe from the radiator, rigid pipe side and remove it.

Refitting ( Removing

) Place the water return pipe from the heater back in its housing and connect it to the rigid pipe.Secure the water return pipe from the heater to the fastenings connecting it to the supply pipe to the heater.Connect the water return pipe from the heater, heater side.Connect the lower coolant outlet hose to the radiator. - 0010T20 coolant change - 0010T21 coolant check density and top up if necessary- 1088A30 ENGINE COOLING SYSTEM - draining and refilling circuit and bleeding air Remove the vehicle from the lift.