5040A60 PIPE FROM CONDENSER TO EVAPORATOR (EXPANSION PIPE) - R+R - Fiat - STILO - eLearn

3362997 - 5040A60 pipe from condenser to evaporator (expansion pipe) - r+r

) - 5530B56 BATTERY DRIP TRAY COVER - R.R.Disconnect the battery's negative terminal.- 5040A10 Air conditioning refrigerant CIRCUIT - Draining and Refilling - 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.1. Undo the nut (1a) fixing the pipe to the condenser connector and disconnect the electrical connection (1b) for the linear sensor.

	Name	Connector
-	Air-Bag front sensor	K39

Lower the vehicle.1. Loosen the nut for the pipe retaining bracket.

1. Loosen the nut for the pipe on the evaporator.2. Release the fuel and vapour recovery pipes from the retaining bridge to facilitate the removal of the pipe from the compressor mounting.

1. Remove the air conditioning pipe.

Refitting ( Removing

) Position the air conditioning pipe.Fasten the petrol and vapour recovery pipes to the retaining bridge.Tighten the nut for the pipe on the evaporator to torque.

	Fastening	Component	Ø	Value(daNm)
-	-	-	-	-

Tighten the nut for the pipe retaining bracket to torque.

	Fastening	Component	Ø	Value(daNm)
-	-	-	-	-

Place the car on a lift.Raise the vehicle using a lift.Tighten the nut fixing the pipe to the condenser connector to torque and connect the electrical connection for the linear sensor.

	Name	Connector
-	Air-Bag front sensor	K39

- 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.- 5040A10 Air conditioning refrigerant CIRCUIT - Draining and Refilling Connect the battery negative terminal. - 5530B56 BATTERY DRIP TRAY COVER - R.R.