1080E28 ENABLEMENT SOLENOID FOR FLOW OF FUEL VAPOUR TO INLET - R+R - Fiat - STILO - eLearn

3362500 - 1080E28 ENABLEMENT SOLENOID FOR FLOW OF FUEL VAPOUR TO INLET - R+R

) Disconnect the negative battery terminal. 1048A32 MANICOTTO da filtro aria a collettore aspirazione - S.R.1. Undo the bolts (1a) fixing the mounting bracket complete with injection control unit (1b) and place it at the side.2. Disconnect the rapid connector for the evaporation control pipe.3. Disconnect the electrical connection for the solenoid valve.

	Description	Connector
3	Fuel vapour recovery solenoid valve	L10

Remove the electrical wiring for the injectors from the retaining clip on the solenoid valve bracket.4. Undo the mounting bracket fixing bolts (4a) and remove the solenoid valve (4b).

Refitting ( Removing

) Fit the solenoid valve and secure it using the fixing bolts.Refit the wiring for the injectors on the retaining clip on the solenoid valve mounting bracket.Connect the electrical connector for the solenoid valve.

	Description	Connector
-	Fuel vapour recovery solenoid valve	L10

Connect the rapid connector for the evaporation control pipe.Fit the bracket complete with injection control unit and tighten the fixing bolts. 1048A32 MANICOTTO da filtro aria a collettore aspirazione - S.R.Connect the negative battery terminal. Op. 1080E62 PIPE FROM ACTIVE CHARCOAL FILTER TO SOLENOID VALVE - R.R.