3362501 - 1080E62 pipe from fuel vapour separator to solenoid - r r

Removing ( Refitting )  - 1048A10  air cleaner filtering element - replace 1. Disconnect the rapid attachment coupling of the fuel vapour recovery pipe from the solenoid.2. Release the pipe from the clips securing it to the bulkhead. Raise the car.1. Undo the fixing bolts (1a) and remove the tank right side shield (1b). 1. Disconnect the quick-fit connector on the pipe between the solenoid and active charcoal filter. 1. Undo the fixing bolts (1a) and remove the fuel and anti-evaporation pipe guard (1b). 1. Release the anti-evaporation pipe (1a) from the clips (1b) located under the body. 1. Remove the anti-evaporation pipe from the upper part of the engine bay. Refitting ( Removing ) Working from beneath the car, fit the pipe, partly lift the axle and position the anti-evaporation pipe. Attach the pipe to the retaining clips on the underbodyConnect the anti-evaporation pipe to the quick-fit connector with the rear section connecting to the active charcoal filter.Fit lower pipe guard and tighten the retaining bolts.Fit the right side tank guard and tighten the retaining bolts.Lower the vehicle. Connect the rapid connector on the anti-evaporation pipe to the solenoid pipe.Secure the pipe to the bulkhead.  - 1048A10  air cleaner filtering element - replace