3362886 - 3340B76 RIGID PIPE (ONE), LH OR RH, TO REAR BRAKE CYLINDERS - R.R.

Removing ( Refitting ) Place the car on a ramp.    4450B11 WHEEL (one) rear - R.R.1. Using the special tool, disconnect the connector on the rear brake rigid pipe (1a) from the section of flexible pipe (1b).

NameCountry
-Box wrench for brake fittings1.856.132.000
1. Using the special tool, disconnect the connector of the rigid pipe to the rear brake caliper flexible pipe.

NameCountry
-Box wrench for brake fittings1.856.132.000
Remove the rigid pipe. Refitting ( Removing ) Position the rigid pipe.Using the special tool, connecct the connector of the rigid pipe to the rear brake caliper flexible pipe.

NameCountry
-Box wrench for brake fittings1.856.132.000
Using the special tool, connect the connector of the rear brake rigid pipe to the section of flexible pipe.

NameCountry
-Box wrench for brake fittings1.856.132.000
    4450B11 WHEEL (one) rear - R.R.Remove the car from the ramps. Removing ( Refitting ) Position the vehicle on the lift.    4450B11 RUOTA (una) posteriore - S.R.Remove the protective cap from the bleed valve on one of the front brake calipers.Connect the recovery device (pipe and reservoir) to the brake caliper bleed valve.Operate the brake pedal until the brake/clutch reservoir is drained.1. Disconnect the connector securing the rigid rear brake pipe to the brake caliper flexible pipe.
1. Disconnect the connector securing the rigid pipe to the rear brake caliper flexible pipe.2. Remove the rigid pipe.
Refitting ( Removing ) Position the rigid pipe.Connect the connector securing the rigid pipe to the rear brake caliper flexible pipe.Connect the connector securing the rigid rear brake pipe to the flexible pipe section.    4450B11 RUOTA (una) posteriore - S.R.Remove the vehicle from the lift.    Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY    Op. 0010T65 HYDRAULIC BRAKE SYSTEM - BLEED AIR