3363645 - 4410AB Verifica tassello in gomma e cuscinetto su ammortizzatore anteriore

Position the vehicle on a two column lift.Remove the front shock absorber [PR 4410A12]Manually check whether there is any clearance, as indicated in the diagramIf there is some clearance, it is highly likely that the bearing is worn or fitted the wrong way round.1. Undo the upper bolt and open the rubber mounting: the diagram illustrates the two positions that the bearing can be fitted in. The correct way of fitting it is the one where the dark ring (1a) can be seen.Once the bearing is correctly fitted or replaced, refit the mounting.2. The diagram below shows the correct position for the fitting the mounting (2a), the limit (2b) and the wrong position (2c).