3360310 - M05 MANUAL FRONT WINDOWS NOT WORKING

During the closure stage, the electric windows do not stop moving in the presence of obstacles

A sensor along the upper inside edge of the window stops the window in the presence of obstacles. The sensor is connected directly to the relevant door node and is always active, even with the key on STOP

		Results of the tests
1	CHECKING WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Connect the diagnostic equipment (Examiner) and check that there are no errors in the antipinch sensor	Continue to Step 4	Error found: antipinch sensor broken or signal missing	Continue to Step 2
2	CHECKING ELECTRICAL CIRCUIT	All OK	Problems met	Operation
	Check continuity/insulation of electrical connection between door Node and antipinch sensor See   E3050  ELECTRIC FRONT WINDOWS	Continue to Step 3	Electrical connection interrupted or not insulated	Restore electrical connection continuity/insulation See   E3050  ELECTRIC FRONT WINDOWS
3	CHECKING CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	The fault persists	Change the antipinch sensor Op.   7005D33
4	CHECKING CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present		The fault persists	Change the damaged door Node Search for the fault starting from another symptom'