3360334 - P40 AUTOCLOSE NOT WORKING / VEHICLE WITH PASSIVE ENTRY

The autoclose system does not work when the driver closes the door and walks away from the car.

The autoclose function can be selected from the instrument panel node nad allows the CID owner to lock the door catch automatically when he or she moves away from the car.

		Results of the tests
0	PRELIMINARY CHECK	All OK	Problems met	Operation
	Check that the autoclose function activates via the instrument panel node.	Continue to Step 1	Function deactivated	Activate the function via the instrument panel node
1	CHECKING WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Connect an Examiner and check the door open/close signal has been correctly downloaded while in parameter mode. Carry out the check on each individual door.	Continue to Step 3	Door open/close signal missing	Continue to Step 2
2	CHECKING ELECTRICAL CIRCUIT	All OK	Problems met	Operation
	Check continuity/insulation of electrical connection between body computer node and door lock See   E7018  PASSIVE ENTRY	Continue to Step 6	Electrical connection interrupted or not insulated	Restore continuity/insulation of electrical connection See   E7018  PASSIVE ENTRY
3	CHECKING WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Keep the Examiner connected and check for errors in the passive entry aerials on the doors	Continue to Step 7	Error found in one door aerial	Continue to Step 4
4	CHECKING ELECTRICAL CIRCUIT	All OK	Problems met	Operation
	Check continuity/insulation of electrical connection between aerial and passive entry node	Continue to Step 5	Electrical connection interrupted or not insulated	Restore continuity/insulation of electrical connection See   E7018  PASSIVE ENTRY
5	CHECKING CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	The fault persists	Replace front door passive entry aerial Op.   5580E72
			The fault persists	Replace rear door passive entry aerial Op.   5580E74
6	CHECKING CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	The fault persists	Change the defective front door catch Op. 7021N72
			The fault persists	Change the defective rear door catch Op.   7010N21
7	CHECKING CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present		The fault persists	Change the passive entry node Op.   5580E70  Search for the fault starting from another symptom'