3360206 - D03 ENGINE NOT RUNNING SMOOTHLY / (IRREGULAR OPERATION)
| Results of the tests | ||||
| 0 | PRELIMINARY CHECKS | All OK | Problems met | Operation | 
|---|---|---|---|---|
| First check: 
 | Continue to Step 1 | Filter element dirty, damaged or incorrectly fitted | Replace or refit filter element correctly Op. 1048A14 | |
| Earth fastening not correct | Renew the wiring | |||
| 1 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation | 
| Connect
the diagnostic equipment (Examiner or other instruments) to the
diagnostic socket. Verify: 
 | Continue to Step 2 | 'Fuel system' error appears | See table Z50 MIXTURE STRENGTH ERROR | |
| 'Upstream lambda sensor' error detected | See table Z56 UPSTREAM LAMBDA SENSOR SIGNAL ERROR | |||
| Another error dectected in the control unit | Continue following the instructions for the diagnostic equipment | |||
| Incoherent parameter | Continue following the instructions for the diagnostic equipment. | |||
| 2 | ROAD TEST WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation | 
| Road
test the vehicle, reproducing the conditions under which the fault
arises, keeping the diagnostic equipment connected Verify: 
 | Continue to Step 3 | 'Fuel system' error appears | See table Z50 MIXTURE STRENGTH ERROR | |
| 'Upstream lambda sensor' error detected | See table Z56 UPSTREAM LAMBDA SENSOR SIGNAL ERROR | |||
| Sudden occurrence of another error detected in the control unit | Continue following the instructions for the diagnostic equipment | |||
| Incoherent parameter | Continue following the instructions for the diagnostic equipment | |||
| 3 | CHECKING FUEL PRESSURE | All OK | Problems met | Operation | 
| Check, if necessary on the road (to reproduce the conditions in which the fault arises), the fuel supply pressure Op. 0510C10 | Continue to Step 4 | Incorrect pressure: obstructions in the fuel supply pipe | Remove the obstructions in the fuel pipe, and if necessary replace it | |
| Pressure incorrect: fuel pump damaged | Replace fuel pump assembly Op. 1040A70 | |||
| 4 | CHECK ON AIR CONDITIONING | All OK | Problems met | Operation | 
| Road test the vehicle and check whether the fault is affected by whether or not the air conditioner is switched on | Continue to Step 5 | Fault present only when air conditioner is on | Continue as instructed in the Table See table L10 CLIMATE CONTROL NOT COOLING | |
| 5 | CHECKING CORRECT OPERATION | All OK | Problems met | Operation | 
| Check that the fault is no longer present | Fault persists: control unit defective | Replace control unit Op. 1056B82 Search for the fault starting from another symptom' | ||