3360278 - K62 ABS AND HANDBRAKE WARNING LIGHTS BOTH ON
The handbrake lever is released|  | The handbrake warning light also indicates that the brake fluid level is low and, if it is on at the same time as the ABS warning light, the malfunction of the EBD system. | 
| Results of the tests | ||||
| 1 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation | 
|---|---|---|---|---|
| Connect the diagnostic equipment and check at the BRAKES NODE: 
 | Continue to Step 2 | system/component fault | Continue as instructed by the tester | |
| 2 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation | 
| Keep the tester connected and check the BRAKE NODE for: 
 | Continue to Step 7 | warning lights not flashing | Continue to Step 6 | |
| 3 | ELECTRICAL EQUIPMENT CHECK | All OK | Problems met | Operation | 
| Check the insulation of the wiring between the handbrake switch and the Body Computer Node | Continue to Step 4 | Wiring s.c. | Renew the wiring | |
| 4 | SWITCH CHECK | All OK | Problems met | Operation | 
| Check the efficiency of the handbrake lever switch | Continue to Step 5 | Switch broken (always closed to earth) | Replace switch Op. 5550D18 | |
| 5 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation | 
| Connect the diagnostic equipment or keep it connected and check the plausibility of the handbrake applied parameter at the BODY COMPUTER NODE | Continue to Step 6 | Parameter not plausible | Replace the Body Computer Node Op. 5505A32 | |
| 6 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation | 
| Keeping the diagnostic equipment connected, check at the INSTRUMENT PANEL NODE: 
 | Continue to Step 7 | warning lights not flashing | Replace instrument panel Op. 5560B11 | |
| 7 | WARNING LIGHTS OPERATION CHECK | All OK | Problems met | Operation | 
| Check that the ABS warning light is offCheck that the 'handbrake applied' warning light is off | End of diagnosis | ABS or ABS and handbrake warning lights on | Replace the ABS unit Op. 3340A12 | |
| ABS or ABS and handbrake warning lights on | Continue to Step 3 | |||