192004671 - E7065 ELECTRIC STEERING LOCK - DESCRIPTION
Description
The Passive-Entry and Easy-Go system allows the management of the vehicle protection, entry into the passenger compartment and engine starting.The system described for access to the passenger compartment and engine starting that allows the customer to enter the vehicle and start up the engine without using the key, simply by carrying a CID.When the driver approaches the locked vehicle with their CID (e.g. in their pocket), pulls the handle and the system automatically recognizes them, unlocking the doors and switching off the alarm. . E7018 PASSIVE ENTRY.Once seated in the driver''s seat, the driver presses a button in the dashboard and the system enables engine starting by recognizing the CID.To exit, press the button again and the engine is switched off.The entire usage cycle for the vehicle consequently takes place without the need to use a key, either for opening/closing the vehicle (remote control function) or for switching the engine on/off (ignition key function).There is no longer an ignition lock barrel in the vehicle but a button in the dashboard for the key on and key off and starting the vehicle.As there is no longer a mechanical key, the steering lock function is achived electrically by means of a unit integrated with an electronic control unit connected to the CAN.The search for the CID for opening the doors takes place by means of 5 external aerials, the one for the starting enablement takes place by means of 3 internal aerials. | It is possible that the moment the starting knob is turned the system is not capable of recognizing the CID becase it is not working or because the CID battery is run down. In this case the CID should be placed in the garage position, i.e. on the old immobilizer aerial located in the centre console. |