3360813 - E3020 WINDSCREEN WASH/WIPE - Description
Description
The windscreen wash/wipe system is
operated by a lever on the right side of the steering wheel. The
lever can be set to five positions that correspond to different
functions by rotating it in a clockwise direction:
- windscreen wiper off (standstill);
- intermittent / automatic operation;
- continuous slow operation;
- continuous fast operation;
- 'antipanic' temporary fast operation (unstable position,
turning the lever in an anti-clockwise direction).
Three different functions can be
selected by rotating the ring wheel in the intermittent / automatic
operating position:
- on the 'BASIC' version the different intermittent speeds
come on (from the slowest to the fastest;
- on the version with a rain sensor: the different sensor
settings comes on: the activation of the rain sensor operates a
windscreen wiper stroke as feed-back that the function has been
switched on.
The adjustment of the windscreen wiper stroke
frequency is automatic depending on the amount of water on the windscreen
detected by the actual sensor: the frequency varies with continuity
from nil (no stroke - windscreen dry) to wiping at the second continuous speed
(heavy rain).The windscreen wiper function is operated
by pulling the lever toward the steering wheel: this action operates
the washer pump: if the lever is held in position, the windscreen
wiper also operates according to a specific control logic: the windscreen
wiper is activated at the first speed: when the windcreen washer
control ceases, an additional stroke is carried out.The control of the functions described above
is carried out by an electronic device inside the steering column
switch unit which produces the intermittent function, controls the operation
of the windscreen wiper motor and the electric windscreen washer
pump and manages the rain sensor.The windscreen wash/wipe circuit is protected
by a specific fuse and is operated by the ignition-operated relay
located in the underdashboard control unit.The windscreen wiper and washer can be operated
with the ignition key turned to ON.(INT/A).