1040A70 SUBMERGED PUMP ASSEMBLY COMPLETE WITH LEVEL GUAGE CONTROL - R + R - Fiat - STILO - eLearn

3362455 - 1040A70 submerged pump assembly complete with level guage control - r + r

) - 5530B56 BATTERY DRIP TRAY COVER - R.R.Disconnect the battery negative terminal. 1. Tilt the back seat cushion to gain access to the submerged pump cover, then unscrew the retaining bolts and raise the protective cover. 2. Disconnect the electrical connection of submerged pump (2a) and remove protective cover (2b).

	Name	Connector
2a	Fuel level gauge	N40

1. Disconnect the fuel outlet and inlet pipes from the quick release fittings2. Use tool (2a) to unscrew lock collar (2b), then remove the fuel pump (2c) together with the level gauge.

	Name	Country
2a	Key	1.870.736.000

Refitting ( Removing

) Place the fuel pump in the special housing in the tank.Fit the lock-nut and use the tool to tighten to torque.

	Name	Country
-	Key	1.870.736.000

Replace the gasket under the fuel pump and take care, when refitting, to check that the gasket is correctly positioned in order to ensure the seal.

Connect the quick-release fittings for the fuel supply and return pipes.Connect the fuel pump and level gauge electrical connection.

	Name	Connector
-	Fuel level gauge	N40

Tighten the fuel pump protective cover retaining bolts. Refit the rear seat cushion.Connect the battery negative terminal.Position the vehicle on the ramp. - 5530B56 BATTERY DRIP TRAY COVER - R.R.