3362487 - 1076A40 exhaust pipe heat shield - r r
Removing ( Refitting ) Position the vehicle on the ramp. - 1076B26 intermediate exhaust silencer - r+r emission control versions1. Drill out the heat shield retaining rivets.2. Undo the fixing bolts (2a) and remove the front retaining clips (2b).3. Remove the front heat shield.
1. Undo the bolt securing the flexible support to the bodywork.2. Remove the rear exhaust silencer.
1. Undo the nuts (1a), bolt (1b) and remove the rear left plastic
shield (1c).
1. Remove the retaining clips (1a), undo the bolts (1b) and remove
the rear heat shield (1c).
Refitting
(
Removing
)
Place the rear heat shield back in its
housing and fasten it using the clips and screws.Fit the rear left plastic protection and
tighten the bolts.Fit the rear exhaust silencer and secure
it to the flexible mountings.Place the front heat shield back in its
seating and secure it using new rivets.Tighten the fixing bolts and fit the front
clips. - 1076B26 intermediate exhaust silencer - r+r emission control
versionsRemove the car from the ramp.