1020C10 OIL SEAL COVER ON AUXILIARY SHAFT - R + R WITH TIMING BELT REMOVED AND REPLACE GASKETS - Fiat - STILO - eLearn

3362548 - 1020C10 oil seal cover on auxiliary shaft - r + r with timing belt removed and replace gaskets

) 1. Undo the bolt (1a) securing auxiliary driveshaft pulley, using the tool (1b) for counter-torque.

	Name	Country
1b	Counter-torque	1.860.765.000

2. Remove the auxiliary drivebelt.

1. Undo the bolts (1a) and remove the oil seal cover on the auxiliary driveshaft (1b) complete with oil seal (1c) and gasket (1d).

1. Working in a vice, remove oil sealing ring (1a) by fitting drift (1b) into the groove on the inner surface of the cover.

Refitting ( Removing

) 1. Fit the auxiliary driveshaft oil seal cover (1a), complete with new gasket (1b), and fix it tightening the bolts (1c) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1c	Bolt	AUX SHAFT SEAL COVER	M6	(Engine block side) 0.9 - 1.2

1. Fit the new oil seal (1a), using the tool (1b).

	Name	Country
1b	Fitting tool	1.860.882.000

Refit the auxiliary drive pulley in its seat and secure it by tightening the bolt to the specified torque using the tool used for the dismantling for counter-torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	AUXILIARY SHAFT DRIVEN GEAR	M10	(Auxiliary shaft side) 6.8 - 8.4

	Name	Country
-	Counter-torque	1.860.765.000