3362549 - 1020D10 front crank shaft oil seal cover - r + r and replace seals with timing belt removed

Removing ( Refitting )  - 1032B44  toothed drive pulley - r + r with timing belt removed - 1020A20  crank case oil sump - r + r clean seals for sealant application1. Unscrew bolt (1a), withdraw rpm sensor (1b) from its seat and move aside.2. Undo the bolts (2a) and remove the crankshaft front oil seal cover (2b), complete with gasket and oil seal.3. Working at the bench, remove oil seal (3a) by inserting drift (3b) in the groove on the inner service of the cover.
Refitting ( Removing ) Fit the crankshaft front cover, complete with a new gasket, and fix it tightening the bolts to the recommended torque.

FasteningComponentØValue(daNm)
-BoltCRANKSHAFT FRONT COVERM6(Crankase side) 0.9
Replace the rear wheel rpm sensor in its housing and fix it using the bolt.1. Fit a new oil seal (1a) using the tool (1b).

NameCountry
1bFitting tool1.860.878.000
 - 1020A20  crank case oil sump - r + r clean seals for sealant application - 1032B44  toothed drive pulley - r + r with timing belt removed