3362555 - 1036G10 CAMSHAFT CONTROLLING VALVES IN LEFT CAMSHAFT HOUSING - R.R. - INCLUDES REPLACEMENT OF CAMSHAFT HOUSING, IF NECESSARY
Removing
(
Refitting
)
Place the vehicle on a ramp.
1016A10 sound-proofing cover - r + r Op. 5530B56 BATTERY DRIP TRAY COVER - R.R.Disconnect the battery negative terminal. | Name | Connector |
|---|---|---|
| - | Battery | A1 |
Refitting
(
Removing
)
1036G12 camshaft in lh head extension - r+r with head extension and timing belt removed 1016B22 lh cylinder head extension - r r with timing belt removed - replace gasket 1072B14 inlet manifold - r+r and replace seal with air conveyor/box removed Op. 1032B40 TOOTHED DRIVEN PULLEY (ONE) - R + R WITH TIMING BELT REMOVED 1072B50 sleeves connecting air capacity box to inlet manifold is - r+r 1084A22 engine oil filler - r r Op. 1084A16 OIL DIPSTICK PIPE - R.R 1056B15 throttle body intergral with mds - r r 1048A32 sleeve from air cleaner to intake manifold - r + r Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT 1036G49 rear camshaft seal, lh or rh - r r with mount and coil/s removed 1056B87 ignition/injection system control unit mount - r r Op. 1056B82 INJECTION/IGNITION SYSTEM E.C.U. (ONE) - R + R Op. 1092A10 CRANKSHAFT PULLEY - R + R Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R Op. 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R. Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE 1092B50 alternator/air conditioner compressor drive belt - adjust tension 1092B54 alternator/water pump drive belt - adjust tension
4450B10 Front WHEEL (one) - R.R.(Right side). 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.(Right side). Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.Connect the battery''s negative terminal. | Name | Connector |
|---|---|---|
| - | Battery | A1 |