3362566 - 1072B14 inlet manifold - r+r and replace seal with air conveyor/box removed

Removing ( Refitting )  - 1056B61  single fuel manifold with injectors - r+r with air conveyor/box removed - 7055B54  under-engine guard - r r - 7055B42  Additional FRONT WHEEL ARCH (one), left or right - R.R.1. Undo the nuts (1a) and move the cable protection (1b).
1. Undo the nuts (1a) and the bolts (1b), then remove the inlet manifold (1c), complete with gasket.
Refitting ( Removing ) Place the inlet manifold complete with a new gasket, back in its housing and fix it tightening the bolt and nuts to the recommended torque.

FasteningComponentØValue(daNm)
-BoltINLET MANIFOLDM8(Cylinder head side) 2,1 - 2,6

FasteningComponentØValue(daNm)
-NutINLET MANIFOLDM8(cylinder head side) 2,1 - 2,6
Place the cable protection back in its housing and secure it using the nuts. - 7055B42  Additional FRONT WHEEL ARCH (one), left or right - R.R. - 7055B54  under-engine guard - r r - 1056B61  single fuel manifold with injectors - r+r with air conveyor/box removed