1820B20 (PUMP) - MASTER CYLINDER R.R. - Fiat - STILO - eLearn

3362732 - 1820B20 (Pump) - MASTER CYLINDER R.R.

) Remove the car from the ramps. - 5530B56 BATTERY DRIP TRAY COVER - R.R.- 5530B10 battery - r+r - 5530B52 Battery DRIP TRAY/SUPPORT - R.R.Remove the protective cap from the bleed valve of one front brake caliperConnect the collection system (pipe and reservoir) to the bleed valve on the brake caliper. Operate the brake pedal until the brake-clutch fluid reservoir is empty. 1. Remove the clip (1a) and release the push rod (1b) for the master cylinder from the clutch pedal.

1. Raise the retaining clip (1a) and disconnect the fluid pipe (1b).2. Disconnect the reservoir fluid hose.3. Undo bolts (3a) and remove master cylinder (pump) (3b).

Refitting ( Removing

) Refit the master cylinder (pump) in its housing and tighten the retaining screws

	Fastening	Component	Ø	Value(daNm)
-	Bolt	CLUTCH FLUID MASTER CYLINDER	M8	2.2

Connect the brake-clutch fluid reservoir hose.Connect the fluid pipe to the pump master cylinder.Secure the pump master cylinder pushrod to the pedal. - 0010T67 hydraulic clutch system bleed air - 5530B52 Battery DRIP TRAY/SUPPORT - R.R.- 5530B10 battery - r+r - 5530B56 BATTERY DRIP TRAY COVER - R.R.Remove the car from the ramps.