3362734 - 1820B30 OPERATING CYLINDER/CLUTCH HYDRAULIC ACTUATOR - R.R.

Removing ( Refitting ) Position the vehicle on the ramp - 5530B56  BATTERY DRIP TRAY COVER - R.R.- 5530B10 battery - r+r  - 5530B52  Battery DRIP TRAY/SUPPORT - R.R.Remove the protective cap from the bleed valve of one front brake caliperConnect the collection system (pipe and reservoir) to the bleed valve on the brake caliper. Operate the brake pedal until the brake-clutch fluid reservoir is empty. 1. Lift the clip (1a) and disconnect the pipe (1b) from the clutch release cylinder.Release the pipe from the retaining band.2. Undo the retaining bolts.3. Remove the operating cylinder from the engine compartment. Refitting ( Removing ) Fit the clutch release cylinder to the gearbox and tighten the retaining bolts to torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	CLUTCH SLAVE CYLINDER	M8	2

Connect the oil pipe for the hydraulic clutch release cylinder.Fit the clutch release cylinder guard and tighten the retaining bolts. - 0010T67  hydraulic clutch system bleed air - 5530B52  Battery DRIP TRAY/SUPPORT - R.R.- 5530B10 battery - r+r  - 5530B56  BATTERY DRIP TRAY COVER - R.R.Remove the car from the ramps.