3362840 - 3330B02 pedal assembly - r r

Removing ( Refitting )  - 5530B56  BATTERY DRIP TRAY COVER - R.R.Disconnect the battery negative terminal.1. Disconnect the electrical connection for the accelerator potentiometer.

	Name	Connector
1	Accelerator pedal potentiometer	K55

2. Disconnect the electrical connection from the switch on the brake pedal.

	Name	Connector
2	Brake pedal switch	I30

3. Disconnect the electrical connection from the switch on the clutch pedal.

	Name	Connector
3	Clutch pedal switch	I31

1. Undo clips (1a) to release detent (1b) and disconnect rod (1c) from the brake pedal.2. Undo clips (2a) to disconnect rod (2b) from the clutch pedal.3. Undo the nuts (3a) and remove the pedal assembly (3b). Refitting ( Removing ) Fit the pedal into its seat and tighten the retaining nuts to the specified torque.

	Fastening	Component	Ø	Value(daNm)
-	Nut	COMPLETE PEDAL ASSEMBLY	M8	2.2

Connect the brake and clutch pedal rods.Reconnect the electrical connection for the accelerator potentiometer.

	Name	Connector
-	Accelerator pedal potentiometer	K55

Reconnect the electrical connection to the switch on the brake pedal.

	Name	Connector
-	Brake pedal switch	I30

Reconnect the electrical connection to the switch on the clutch pedal.

	Name	Connector
-	Clutch pedal switch	I31

Connect the battery negative terminal. - 5530B56  BATTERY DRIP TRAY COVER - R.R.