3362871 - 3340A13 ABS CONTROL UNIT SUPPORT - R.R

    Op. 3340A12 ABS HYDRAULIC AND ELECTRONIC CONTROL UNIT - R.R.1. Undo retaining bolts (1a) and remove the ABS control unit mounting (1b). Refitting ( Removing ) Position the ABS control unit mounting.Tighten the ABS control unit mounting bolts.    Op. 3340A12 ABS HYDRAULIC AND ELECTRONIC CONTROL UNIT - R.R.- Place the Selespeed fluid reservoir in position and tighten the fixing nut and bolt.- Connect the negative battery terminal.    Op. 5530B56 BATTERY DRIP TRAY COVER - R.R.    Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY    Op. 0010T65 HYDRAULIC BRAKE SYSTEM - BLEED AIR Removing ( Refitting ) Disconnect the negative battery terminal.    1016A10 COPERCHIO INSONORIZZANTE - S.R.Op. 5530B10 BATTERY - R+R    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R    Op. 3340A12 ABS HYDRAULIC AND ELECTRONIC CONTROL UNIT - R.R.Remove the protective cap from the bleed valve on one of the front brake calipers.Connect the recovery device (pipe and reservoir) to the brake caliper bleed valve.Operate the brake pedal until the brake/clutch reservoir is drained.    Op. 3340A12 ABS HYDRAULIC AND ELECTRONIC CONTROL UNIT - R.R.1. Working at the bench, separate the ABS hydraulic and electronic control unit (1a) from the mounting (1b). Refitting ( Removing ) Secure the mounting to the ABS hydraulic and electronic control unit.    Op. 3340A12 ABS HYDRAULIC AND ELECTRONIC CONTROL UNIT - R.R.    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.ROp. 5530B10 BATTERY - R+R    1016A10 COPERCHIO INSONORIZZANTE - S.R.Connect the negative battery terminal.    Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY    Op. 0010T65 HYDRAULIC BRAKE SYSTEM - BLEED AIR