3363565 - 1084B14 engine oil pump - r+r with power unit removed
Removing
(
Refitting
)
- 1004D40 engine - position on stand and remove
.
- 1020A24 crank case oil sump - r + r clean seals for sealant
application with engine removed
.
1. Undo the retaining bolts.2. Remove the engine oil pump (2a) complete with draught element
(2b).3. Recover the oil pump gasket.
Refitting
(
Removing
)
Replace the oil pump gasket.Position the oil pump fitting the drive
shaft in its housing.Tighten the bolts fixing the oil pump to
the cylinder block/crankcase to torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Bolt | ENGINE OIL PUMP | M8 | 2.3 ÷ 2.8 |