3363723 - E2010 SIDE LIGHTS / NO. PLATE LIGHTS - Functional description (Xenon Gas headlamps)

Functional description

The side lights activated signal is sent to pin 28 of connector B of the Body Computer M1 from the steering column switch unit H5 . The 'ignition ON' signal (INT) for the switch H1 reaches the underdashboard control unit B2 at pin 11 of connector H and from there moves on to the Body Computer M1 (pin 9 of connector F). The side lights are active even if dusk sensor K85 is present (signal to pin 7 of connector D of M1 ) , and AUTO function is set on stalk unit H5 (signal to pin 2 of connector I of M1 ). The dusk sensor K85 is supplied from the INT line protected by fuse F49 of control unit B2 ; The lights are also activated by the PARK button in the switch unit H90 (signal to pin 17 of connector H of M1 ). The Body Computer M1 controls the supply for the front side lights F10 (left) and F11 (right) The signal is sent by the headlamp internal electronic circuit, which manages activation of the relevant side light. Body Computer M1 also controls the supply - from pins 30 and 40 of connector B - , to tail-lights F30 (left) F31 (right) and number plate lights (in the unit F52 - from pins 5, 6, 9 of D and 38 of connector E). The Body Computer M1 is connected, via the CAN line, to the instrument panel E50 to manage the side light activation warning light and the 'light fault' warning light in the case of faults in the circuit.