All operations should be carried out taking
great care to avoid injury to persons.For some procedures, the use of special
tools is indicated. The use of these tools is vital in order to
work safely.Follow the safety instructions in force
for workshop procedures. Where necessary, the Manual contains specific warnings
to prevent the risk of dangerous situations.When using chemicals, closely follow the
safety instructions given on the safety sheet which the supplier
must give the user.
WARNINGS
All the operations should be carried out
taking great care not to damage the components.In order to release parts which are sticking,
tap gently with an aluminium or lead hammer if iron materials are involved:
use a wooden or resin hammer for light alloy parts. use a wooden
or resin hammer for light alloy parts.When dismantling, check that the components
have reference marks.During refitting, lubricate the parts as
necessary to prevent seizure during the initial period of operation.When refitting, it is vital to follow the
recommended tightening torques and adjustment data.During each refitting, replace the gaskets,
oil seals, spring washers, safety plates, self-locking nuts and
all components which have deteriorated.