3362392 - 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE

Removing ( Refitting )     1016A10 COPERCHIO INSONORIZZANTE - S.R.1. Position a beam lengthways by resting on the suspension domes.
DescriptionCode
1Crossmember1.870.595.000
2. Position beam (2a) crossways, rest the front part (2b) on the sacrificial beam and secure the rear part to the beam positioned previously using bolt (2c).
DescriptionCode
2aFront support1.860.851.001
DescriptionCode
2bVertical support1.870.748.000
3. Fit the bracket complete with hook on the alternator support.Secure the chain to the lifting device and tension the engine.
1. Undo the fixing bolts (1a) and move the coolant expansion tank (1b).
1. Undo the nuts fixing the flexible mounting to the rigid engine support.2. Undo the bolts securing the flexible mounting to the strut and the turret.3. Remove the timing side flexible mounting.
Refitting ( Removing ) Place the flexible mounting in position on the strut and the rigid support.Tighten the nuts to the rigid support to the recommended torque.
FasteningComponentØ  Value(daNm)
-NutFRONT FLEXIBLE MOUNTING BLOCKS, POWER UNITM12 X 1.25(Engine side) 6
Tighten the fixing bolts on the strut and the turret to the specified torque.
FasteningComponentØ  Value(daNm)
-BoltFRONT FLEXIBLE MOUNTING BLOCKS, POWER UNITM10 X 1.25(strut/turret side) 5
Remove the tools used previously for supporting the engine.
DescriptionCode
2bVertical support1.870.748.000
DescriptionCode
2aFront support1.860.851.001
DescriptionCode
1Crossmember1.870.595.000
Place the coolant expansion tank back in its housing and tighten the fixing bolts to the recommended torque.
FasteningComponentØ  Value(daNm)
-BoltFRONT FLEXIBLE MOUNTING BLOCKS, POWER UNITM6(Expansion tank side) 0.8
    1016A10 COPERCHIO INSONORIZZANTE - S.R.